- Camlp5 -

Version 6.08-exp

• Introduction
• Transitional and Strict
• Parsing and printing tools

• Parsing tools
  • Stream parsers
  • Stream lexers
  • Functional parsers
  • Backtracking parsers
  • Extensible grammars
• Printing tools
  • Extensible printers
  • Pprintf
  • Pretty print
• Language extensions
  • Locations
  • Syntax tree
  • Syntax tree - transi
  • Syntax tree - strict
  • Quotation kit q_ast.cmo
  • The Pcaml module
  • Directives
  • Extensions of syntax
  • Extensions of printing
  • Redefining OCaml syntax
  • Quotations
  • Revised syntax
  • Scheme syntax
  • Macros
  • Pragma directive
  • Extensible functions
• Appendix
  • Commands and Files
  • Library
  • Camlp5 sources
  • About Camlp5

Stream lexers

The file "pa_lexer.cmo" is a Camlp5 syntax extension kit for parsers of streams of the type 'char'. This syntax is shorter and more readable than its equivalent version written with classical stream parsers. Like classical parsers, they use recursive descendant parsing. They are also pure syntax sugar, and each lexer written with this syntax can be written using normal parsers syntax.

(An old version, named "pa_lex.cmo" was provided before with a different syntax. It is no longer distributed, its proposed syntax being confusing.)

Introduction

Classical parsers in OCaml apply to streams of any type of values. For the specific type "char", it has been possible to shorten the encoding in several ways, in particular by using strings to group several characters together, and by hidding the management of a "lexing buffer", a data structure recording the matched characters.

Let us take an example. The following function parses a left bracket followed by a less, a colon or nothing, and record the result in a buffer. In classical parsers syntax, this could be written like this:

  fun buf ->
    parser
    [ [: `'['; `'<' :] ->
        Plexing.Lexbuf.add '<' (Plexing.Lexbuf.add '[' buf)
    | [: `'['; `':' :] ->
        Plexing.Lexbuf.add ':' (Plexing.Lexbuf.add '[' buf)
    | [: `'[' :] ->
        Plexing.Lexbuf '[' buf ]

With the new syntax, it is possible to write it as:

  lexer [ "[<" | "[:" | "[" ]

The two codes are strictly equivalent, but the lexer version is easier to write and understand, and is much shorter.

Syntax

When loading the syntax extension pa_lexer.cmo, the OCaml syntax is extended as follows:

          expression ::= lexer
               lexer ::= "lexer" "[" rules "]"
               rules ::= rules rule
                       | <nothing>
                rule ::= symbols [ "->" action ]
             symbols ::= symbols symbol err
                       | <nothing>
              symbol ::= "_" no-record-opt
                       | CHAR no-record-opt
                       | CHAR "-" CHAR no-record-opt
                       | STRING no-record-opt
                       | simple-expression
                       | "?=" "[" lookaheads "]"
                       | "[" rules "]"
       no-record-opt ::= "/"
                       | <nothing>
   simple-expression ::= LIDENT
                       | "(" <expression> ")"
          lookaheads ::= lookaheads "|" lookahead-sequence
                       | lookahead-sequence
  lookahead-sequence ::= lookahead-symbols
                       | STRING
   lookahead-symbols ::= lookahead-symbols lookahead-symbol
                       | lookahead-symbol
    lookahead-symbol ::= CHAR
                       | CHAR "-" CHAR
                       | "_"
                 err ::= "?" simple-expression
                       | "!"
                       | <nothing>
              action ::= expression

The identifiers "STRING", "CHAR" and "LIDENT" above represent the OCaml tokens corresponding to string, character and lowercase identifier (identifier starting with a lowercase character).

Moreover, together with that syntax extension, another extension is added the entry expression, typically for the semantics actions of the "lexer" statement above, but not only. It is:

  expression ::= "$" "add" STRING
               | "$" "buf"
               | "$" "empty"
               | "$" "pos"

Remark: the identifiers "add", "buf", "empty" and "pos" are not keywords (they are not reserved words) but just identifiers. On the contrary, the identifier "lexer", which introduces the syntax, is a new keyword and cannot be used as variable identifier any more.

Semantics

A lexer defined in the syntax above is a shortcut version of a parser applied to the specific case of streams of characters. It could be written with a normal parser. The proposed syntax is much shorter, easier to use and to understand, and silently takes care of the lexing buffer for the programmer. The lexing buffers are data structures, which are passed as parameters to called lexers and returned by them.

Our lexers are of the type:

  Plexing.Lexbuf.t -> Stream.t char -> u

where "u" is a type which depends on what the lexer returns. If there is no semantic action (since it it optional), this type is automatically "Plexing.Lexbuf.t" also.

A lexer is, actually, a function with two implicit parameters: the first one is the lexing buffer itself, and the second one the stream. When called, it tries to match the stream against its first rule. If it fails, it tries its second rule, and so on, up to its last rule. If the last rule fails, the lexer fails by raising the exception "Stream.Failure". All of this is the usual behaviour of stream parsers.

In a rule, when a character is matched, it is inserted into the lexing buffer, except if the "no record" feature is used (see further).

Rules which have no semantic action return the lexing buffer itself.

Symbols

The different kinds or symbols in a rule are:

• The token "underscore", which represents any character. Fails only if the stream is empty.
• A character which represents a matching of this character.
• A character followed by the minus sign and by another character which represent all characters in the range between the two characters in question.
• A string with represents a matching of all its characters, one after the other.
• An expression corresponding to a call to another lexer, which takes the buffer as first parameter and returns another lexing buffer with all characters found in the stream added to the initial lexing buffer.
• The sequence "?=" introducing lookahead characters.
• A rule, recursively, between brackets, inlining a lexer.

In the cases matching characters (namely underscore, character, characters range and string), the symbol can be optionally followed by the "no record" character "slash" specifying that the found character(s) are not added into the lexing buffer. By default, they are. This feature is useful, for example, writing a lexer which parses strings, when the initial double quote and final double quote should not be part of the string itself.

Moreover, a symbol can be followed by an optional error indicator, which can be:

• The character ? (question mark) followed by a string expression, telling that, if there is a syntax error at this point (i.e. the symbol is not matched although the beginning of the rule was), the exception Stream.Error is raised with that string as parameter. Without this indicator, it is raised with the empty string. This is the same behaviour than with classical stream parsers.
• The character ! (exclamation mark), which is just an indicator to let the syntax expander optimize the code. If the programmer is sure that the symbol never fails (i.e. never raises Stream.Failure), in particular if this symbol recognizes the empty rule, he can add this exclamation mark. If it is used correctly (the compiler cannot check it), the behaviour is identical as without the !, except that the code is shorter and faster, and can sometimes be tail recursive. If the indication is not correct, the behaviour of the lexer is undefined.

Specific expressions

When loading this syntax extension, the entry <expression>, at level labelled "simple" of the OCaml language is extended with the following rules:

• $add followed by a string, specifing that the programmer wants to add all characters of the string in the lexing buffer. It returns the new lexing buffer. It corresponds to an iteration of calls to Plexing.Lexbuf.add with all characters of the string with the current lexing buffer as initial parameter.
• $buf which returns the lexing buffer converted into string.
• $empty which returns an empty lexing buffer.
• $pos which returns the current position of the stream in number of characters (starting at zero).

Lookahead

Lookahead is useful in some cases, when factorization of rules is impossible. To understand how it is useful, a first remark must be done, about the usual behaviour of Camlp5 stream parsers.

Stream parsers (including these lexers) use a limited parsing algorithm, in a way that when the first symbol of a rule is matched, all the following symbols of the same rule must apply, otherwise it is a syntax error. There is no backtrack. In most of the cases, left factorization of rules resolve conflicting problems. For example, in parsers of tokens (which is not our case here, since we parse only characters), when one writes a parser to recognize both typical grammar rules "if..then..else" and the shorter "if..then..", the system transforms them into a single rule starting with "if..then.." followed by a call to a parser recognizing "else.." or nothing.

Sometimes, however, this left factorization is not possible. A lookahead of the stream to check the presence of some elements (these elements being characters, if we are using this "lexer" syntax) might be necessary to decide if is a good idea to start the rule. This lookahead feature may unfreeze several characters from the input stream but without removing them.

Syntactically, a lookahead starts with ?= and is followed by one or several lookahead sequences separated by the vertical bar |, the whole list being enclosed by braces.

If there are several lookaheads, they must all be of the same size (contain the same number of characters).

If the lookahead sequence is just a string, it corresponds to all characters of this string in the order (which is different for strings outside lookahead sequences, representing a choice of all characters).

Examples of lookaheads:

  ?= [ _ ''' | '\\' _ ]
  ?= [ "<<" | "<:" ]

The first line above matches a stream whose second character is a quote or a stream whose first character is a backslash (real example in the lexer of OCaml, in the library of Camlp5, named "plexer.ml"). The second line matches a stream starting with the two characters < and < or starting with the two characters < and : (this is another example in the same file).

Semantic actions of rules

By default, the result of a "lexer" is the current lexing buffer, which is of type "Plexing.Lexbuf.t". But it is possible to return other values, by adding "->" at end of rules followed by the expression you want to return, as in usual pattern matching in OCaml.

An interesting result, for example, could be the string corresponding to the characters of the lexing buffer. This can be obtained by returning the value "$buf".

A complete example

A complete example can be seen in the sources of Camlp5, file "lib/plexer.ml". This is the lexer of OCaml, either "normal" or "revised" syntax.

Compiling

To compile a file containing lexers, just load pa_lexer.cmo using one of the following methods:

• Either by adding pa_lexer.cmo among the Camlp5 options. See the Camlp5 manual page or documentation.
• Or by adding #load "pa_lexer.cmo"; anywhere in the file, before the usages of this "lexer" syntax.

How to display the generated code

You can see the generated code, for a file "bar.ml" containing lexers, by typing in a command line:

  camlp5r pa_lexer.cmo pr_r.cmo bar.ml

To see the equivalent code with stream parsers, use:

  camlp5r pa_lexer.cmo pr_r.cmo pr_rp.cmo bar.ml

↑